AI summary · arXiv: 2105.13399v1 · cs.LG

Times Series Forecasting for Urban Building Energy Consumption Based on Graph Convolutional Network

Yuqing Hu, Xiaoyuan Cheng, Suhang Wang, Jianli Chen, Tianxiang Zhao, Enyan Dai
Original paper · DOI 10.1016/j.apenergy.2021.118231 Submitted to arXiv on 27 May. 2021 Published in Applied Energy (February 2022) 22 pages, 10 figures, submitted to applied energy License: NONEXCLUSIVE-DISTRIB 1.0

How to read this summary? Illustrated guide

The essentials

  • The building industry accounts for over 40% of energy consumption in the United States
  • Many cities are implementing ambitious energy-saving strategies by retrofitting existing buildings and constructing new sustainable communities
  • Current urban building energy models have limitations in capturing inter-building interdependency due to their dynamic and non-linear characteristics
  • A team of researchers proposed a novel data-driven UBEM that synthesizes solar-based building interdependency and spatial-temporal graph convolutional network (ST-GCN) algorithm
  • The feasibility of the proposed model was tested by comparing its performance with other common time-series machine learning models, and the ST-GCN model outperformed all others
  • The physical knowledge embedded in the model was well interpreted, highlighting how data-driven models integrated with engineering or physical knowledge can significantly improve urban building energy simulation.
  • This study provides valuable insights into developing accurate UBEMs that can support designing energy-efficient communities for sustainable urban development.

Key points written by AI: they may contain errors, check them against the paper.

AI-generated keywords: Urban Building Energy Model Sustainable Urban Development Solar-Based Building Interdependency Spatial-Temporal Graph Convolutional Network Time-Series Machine Learning

Read further

  • Comprehensive Summary
  • Layman's Summary
  • Blog article
  • Original abstract
The world is rapidly urbanizing, and the building industry accounts for over 40% of energy consumption in the United States. To address this issue, many cities are implementing ambitious energy-saving strategies by retrofitting existing buildings and constructing new sustainable communities. However, current urban building energy models (UBEM) have limitations in capturing inter-building interdependency due to their dynamic and non-linear characteristics. This can lead to inaccurate urban energy modeling as these models either ignore or oversimplify building interdependencies. To address this research gap, a team of researchers proposed a novel data-driven UBEM that synthesizes solar-based building interdependency and spatial-temporal graph convolutional network (ST-GCN) algorithm. The study used a university campus located in downtown Atlanta as an example to predict hourly energy consumption. The feasibility of the proposed model was tested by comparing its performance with other common time-series machine learning models. The results showed that the ST-GCN model outperformed all others, indicating its potential for accurately predicting urban building energy consumption. Additionally, the physical knowledge embedded in the model was well interpreted, highlighting how data-driven models integrated with engineering or physical knowledge can significantly improve urban building energy simulation. Overall, this study provides valuable insights into developing accurate UBEMs that can support designing energy-efficient communities for sustainable urban development. By addressing limitations in current models through innovative approaches like ST-GCN algorithms, we can create more effective solutions for reducing energy consumption in buildings and promoting sustainable living practices globally.

Was this synthesis useful?

Score: 0

Why do we need votes?

Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.

Figures and plots

Ask about a figure by number or use its question button to request visual analysis. Up to two figures and four image panels per question. Values read from plots are approximate; check the original data.

AI assistant instructions?

Tools for this paper

Explain it differently 1 free rewrite left today
Save to a collection Group papers in collections to compare them, chat with them and export them. Continue with Google Create a free account Log in

Advanced tools Premium

For researchers who follow a field closely: citation alerts, journal-club slides, version comparison and Zotero export. Discover Premium

Zotero Zotero guide
Citation alerts 136 papers already cite it: be emailed each new one. Citation alerts guide
Who works on it?

Among the 31 papers around this one, the name that comes back most: Samuel Moveh (2 papers)

4 more people sign several of them. The full map adds their institutions and approaches, from the papers of the last years.

Continue with Google Create a free account: your first map is free
Weekly letter The latest letter of its field, "Artificial intelligence this week" of 16 November 2026: Artificial intelligence this week: What impressive scores leave out · Receive one by email for free

Papers around this one

See them on a map

Ranked by how close their title and abstract are to this paper’s. Select some to read them together.

Closest papers

  1. Very close Another approach to the problem Cites this paper
    Estimating Spatio-Temporal Building Power Consumption Based on Graph Convolution Network Method
    Georgios Vontzos, Vasileios Laitsos, A. Charakopoulos et al. · 2024 · Dynamics · cited 15 times · Not summarized yet

    Estimating Spatio-Temporal Building Power Consumption combines graph convolution and LSTM to predict building power from spatial and temporal dependencies, like this paper’s campus energy forecasting task.

    Abstract

    Buildings are responsible for around 30% and 42% of the consumed energy at the global and European levels, respectively. Accurate building power consumption estimation is crucial for resource saving. This research investigates the combination of graph convolutional networks (GCNs) and long short-term memory networks (LSTMs) to analyze power building consumption, thereby focusing on predictive modeling. Specifically, by structuring graphs based on Pearson’s correlation and Euclidean distance methods, GCNs are employed to discern intricate spatial dependencies, and LSTM is used for temporal dependencies. The proposed models are applied to data from a multistory, multizone educational building,…

  2. Very close Another approach to the problem Cites this paper
    Multi-Building Energy Forecasting Through Weather-Integrated Temporal Graph Neural Networks
    Samuel Moveh, E. A. Merchán-Cruz, Maher Abuhussain et al. · 2025 · Buildings · cited 9 times · Not summarized yet

    Multi-Building Energy Forecasting combines temporal graph neural networks with weather data to predict energy use across building types, addressing this paper’s multi-building forecasting problem.

    Abstract

    While existing building energy prediction methods have advanced significantly, they face fundamental challenges in simultaneously modeling complex spatial–temporal relationships between buildings and integrating dynamic weather patterns, particularly in dense urban environments where building interactions significantly impact energy consumption patterns. This study presents an advanced deep learning system combining temporal graph neural networks with weather data parameters to enhance prediction accuracy across diverse building types through innovative spatial–temporal modeling. This approach integrates LSTM layers with graph convolutional networks, trained using energy consumption data fro…

  3. Very close Another approach to the problem Cites this paper
    Short term energy consumption prediction of regional building group based on spatiotemporal graph convolutional network considering spatiotemporal correlation between building nodes
    Ya-Mei Ma, Ying-Jun Ruan, Ting-Ting Xu et al. · 2025 · Journal of Physics: Conference Series · Not summarized yet

    Short term energy consumption prediction models regional building loads with a spatiotemporal graph convolution network, sharing this paper’s building-group forecasting problem.

    Abstract

    With the rapid development of high-performance computing technology, accurate regional building energy consumption prediction based on data-driven is the basis for the refined management of regional energy consumption and energy saving and emission reduction. Owing to climatic conditions, human movement, and other factors, the energy consumption of buildings is influenced not only by their inherent characteristics but also by surrounding buildings. However, there is a lack of a systematic approach to modeling the spatial dependence of regional buildings. Therefore, this study proposed a spatiotemporal graph convolution model combining different graph construction methods for short-term regio…

  4. Very close Same question Cites this paper
    Interpretable Urban Building Energy Modeling by Heterogeneous Graph Neural Networks: A Case Study of Residential Blocks in Wuhan
    C. Yao, Dan Li, S. Fang et al. · 2026 · Buildings · Not summarized yet

    Interpretable Urban Building Energy Modeling uses heterogeneous graph neural networks to represent building relationships and estimate energy use in residential blocks.

    Abstract

    Traditional urban building energy modeling often overlooks the complexity of spatial configurations and mutual shading effects, thereby limiting its accuracy. This study proposes a novel, interpretable, data-driven framework based on heterogeneous graph neural networks (GNNs) to uncover and characterize the complex interrelationships between building morphology and urban topology. Using a parametric platform, this study generated a graph dataset of 285 residential blocks in Wuhan, structured as a dual-level graph: Building Zone Graphs (BZGs) and Building Layout Graphs (BLGs). Four GNN models were trained based on the dataset, and the evaluated results demonstrate that GraphTransformer outper…

  5. Very close Same method, another problem
    Graph Neural Network‐Based Prediction of Building Energy Consumption
    Ali Maboudi Reveshti, J. Dabbagh, Jhila Nasiri Reveshti et al. · 2026 · Energy Science & Engineering · cited 1 time · Not summarized yet

    Graph Neural Network-Based Prediction represents thermal zones as a graph and predicts heating and cooling loads using simulated weather-driven data.

    Abstract

    This study develops a framework for predicting building energy consumption using Graph Neural Networks (GNNs). A two‐story reference building with seven thermal zones was represented as a graph, where each zone was a node and thermal or spatial interactions were edges. EnergyPlus simulations, driven by real hourly weather data from Tehran, London, and New York, generated the training dataset. The GNN was implemented in PyTorch Geometric and trained on these outputs. The proposed model predicts cooling and heating loads with high accuracy. It achieved mean absolute errors (MAE) of 0.8–1.0 kWh, a 15%–40% reduction compared with baseline models: Random Forest and XGBoost. Performance was stable…

  6. Very close Another approach to the problem
    BuildSTG: A Multi-building Energy Load Forecasting Method using Spatio-Temporal Graph Neural Network
    Yongzheng Liu, Yi-Ming Wang, Po Xu et al. · 2025 · Energy and Buildings · cited 26 times · Not summarized yet

    BuildSTG uses building and environmental features to construct graphs and forecast energy loads across multiple buildings with spatiotemporal graph neural networks.

    Abstract

    Due to the extensive availability of operation data, data-driven methods show strong capabilities in predicting building energy loads. Buildings with similar features often share energy patterns, reflected by spatial dependencies in their operational data, which conventional prediction methods struggle to capture. To overcome this, we propose a multi-building prediction approach using spatio-temporal graph neural networks, comprising graph representation, graph learning, and interpretation. First, a graph is built based on building characteristics and environmental factors. Next, a multi-level graph convolutional architecture with attention is developed for energy prediction. Lastly, a metho…

  7. Very close Another approach to the problem
    Spatio-Temporal Deep Learning Framework for Smart Grid Load Forecasting in Urban Buildings
    J. G., V. V, R. B. et al. · 2025 · 2025 4th International Conference on Applied Artificial Intelligence and Computing (ICAAIC) · cited 1 time · Not summarized yet

    Spatio-Temporal Deep Learning Framework forecasts urban building electricity loads using temporal convolution, recurrent units, and graph attention.

    Abstract

    Energy efficiency, demand management, sustainable planning of an energy infrastructure, and successful forecasting of the electricity load in smart cities are very important. The current paper offers a new deep learning approach, ST-DEForecastNet, to this challenge of spatio-temporal forecasting in the context of urban building environments. The architecture consists of a temporal encoder relying on Temporal Convolutional Network (TCN) and Gated Recurrent Units (GRU), and a spatial encoder that uses Graph Attention Networks (GAT) to capture the intra-building energy correlations. Multi-head self-attention fusion layer achieves cross-dimensional dependencies, and multi-horizon predictions are…

  8. Very close Same question Cites this paper
    A Novel Graph Neural Network for Zone-Level Urban-Scale Building Energy Use Estimation
    Eren Gökberk Halaçlı, Ilkim Canli, O. K. Iseri et al. · 2023 · International Conference on Systems for Energy-Efficient Built Environments · cited 11 times · Not summarized yet

    A Novel Graph Neural Network estimates urban-scale building energy use while modeling interdependencies between units in multi-zone buildings.

    Abstract

    Buildings are highly responsible for total energy consumption in cities; therefore, accurate estimation of building energy consumption is essential for developing energy-efficient strategies on an urban scale. Data-driven urban building energy models can predict energy use with high precision and low computational cost. In recent years, machine learning, especially neural networks, emerged as the prominent method for predicting energy load for buildings. These models typically use different input features on building form, occupancy and operation. However, they remain inadequate in capturing the complex inter-dependencies (i.e., heat transfer) between units in multi-zone buildings, as they d…

Prior work it builds on

  1. Close Groundwork for this paper Used in depth by this paper A method it uses
    Data-driven Urban Energy Simulation (DUE-S): A framework for integrating engineering simulation and machine learning methods in a multi-scale urban energy modeling workflow
    Alex Nutkiewicz, Zheng Yang, Rishee K. Jain · 2018 · Applied Energy · cited 202 times · Not summarized yet

    Data-driven Urban Energy Simulation integrates engineering simulation and machine learning in multi-scale urban modeling while addressing inter-building dynamics.

    Abstract

    The world is rapidly urbanizing, and the energy intensive built environment is becoming increasingly responsible for the world’s energy consumption and associated environmental emissions. As a result, significant efforts have been put forth to develop methods that can accurately model and characterize building energy consumption in cities. These models aim to utilize physics-based building energy simulations, reduced-order calculations and statistical learning methods to assess the energy performance of buildings within a dense urban area. However, current urban building energy models are limited in their ability to account for the inter-building energy dynamics and urban microclimate factor…

  2. Close* Groundwork for this paper A method it uses
    Urban Data and Building Energy Modeling: A GIS-Based Urban Building Energy Modeling System Using the Urban-EPC Engine
    S. Quan, Qi Li, G. Augenbroe et al. · 2015 · cited 76 times · Not summarized yet

    Urban Data and Building Energy Modeling presents a GIS-based system for urban building energy modeling, a broader modeling context for this study.

  3. Close Review A method it uses
    Urban building energy modeling: State of the art and future prospects
    F. Johari, G. Peronato, Paria Sadeghian et al. · 2020 · Renewable & Sustainable Energy Reviews · cited 238 times · Not summarized yet

    Urban building energy modeling: State of the art and future prospects reviews urban building energy models and their development from physical to hybrid approaches.

    Abstract

    Abstract During recent years, urban building energy modeling has become known as a novel approach for identification, support and improvement of sustainable urban development initiatives and energy efficiency measures in cities. Urban building energy models draw the required information from the energy analysis of buildings in the urban context and suggest options for effective implementation of interventions. The growing interest in urban building energy models among researchers, urban designers and authorities has led to the development of a diversity of models and tools, evolving from physical to more advanced hybrid models. By critically analyzing the published research, this paper incor…

  4. Close Broader context A method it uses
    Predicting city-scale daily electricity consumption using data-driven models
    Zhe Wang, T. Hong, Han Li et al. · 2021 · Advances in Applied Energy · cited 117 times · Not summarized yet

    Predicting city-scale daily electricity consumption compares data-driven methods for city-level demand forecasting rather than inter-building energy modeling.

    Abstract

    ABSTRACT Accurate electricity demand forecasts that account for impacts of extreme weather events are needed to inform electric grid operation and utility resource planning, as well as to enhance energy security and grid resilience. Three common data-driven models are used to predict city-scale daily electricity usage: linear regression models, machine learning models for time series data, and machine learning models for tabular data. In this study, we developed and compared seven data-driven models: (1) five-parameter change-point model, (2) Heating/Cooling Degree Hour model, (3) time series decomposed model implemented by Facebook Prophet, (4) Gradient Boosting Machine implemented by Micro…

  5. Close Review A method it uses
    Urban building energy modeling – A review of a nascent field
    C. Reinhart, C. Davila · 2015 · Building and Environment · cited 1,036 times · Not summarized yet

    Urban building energy modeling – A review of a nascent field surveys bottom-up methods and workflows for modeling energy performance across neighborhoods.

    Abstract

    Abstract Over the past decades, detailed individual building energy models (BEM) on the one side and regional and country-level building stock models on the other side have become established modes of analysis for building designers and energy policy makers, respectively. More recently, these two toolsets have begun to merge into hybrid methods that are meant to analyze the energy performance of neighborhoods, i.e. several dozens to thousands of buildings. This paper reviews emerging simulation methods and implementation workflows for such bottom-up urban building energy models (UBEM). Simulation input organization, thermal model generation and execution, as well as result validation, are di…

Papers that cite it

  1. Close Another approach to the problem
    Deep Learning Framework Using Transformer Networks for Multi Building Energy Consumption Prediction in Smart Cities
    Samuel Moveh, E. A. Merchán-Cruz, Maher Abuhussain et al. · 2025 · Energies · cited 33 times · Not summarized yet

    Deep Learning Framework Using Transformer Networks forecasts energy consumption across multiple smart-city buildings by modeling cross-building correlations.

    Abstract

    The increasing complexity of urban building energy systems necessitates advanced prediction methods for efficient energy management. Urban buildings account for approximately 40% of global energy consumption, making accurate prediction crucial for sustainability goals. This research develops a novel transformer-based deep learning framework for multi-building energy consumption forecasting. Despite recent advances in energy prediction techniques, existing models struggle with multi-building scenarios due to limited ability to capture cross-building correlations, inadequate integration of diverse data streams, and poor scalability when deployed at urban scale—gaps this research specifically a…

  2. Close Same method, another problem
    Developing surrogate models for the early-stage design of residential blocks using graph neural networks
    Zhao-Ji Wu, Ming-Kai Li, Wenli Liu et al. · 2025 · Building Simulation · cited 30 times · Not summarized yet

    Developing surrogate models uses graph neural networks to predict residential-block performance while accounting for inter-building effects.

    Abstract

    Building simulation based on physical modeling is commonly adopted for performance prediction, but the high time costs hinder its application in the early design stage of buildings. Data-driven surrogate models have been proposed as a means to replicate computationally expensive simulation models. However, existing surrogate models for sustainable residential block design are limited in scope, focusing either on individual buildings or on specific cases within multi-block projects. This study leverages graph neural networks to develop optimal surrogate models incorporating inter-building effects to predict multiple indicators of sustainable performance for residential blocks at a region leve…

  3. Close* Same method, another problem
    Spatiotemporal prediction of urban building rooftop photovoltaic potential based on GCN-LSTM
    Chen Yang, Shengyuan Li, Z. Gou · 2025 · Energy and Buildings · cited 37 times · Not summarized yet

    Spatiotemporal prediction of urban building rooftop photovoltaic potential applies a GCN-LSTM to a different building-related forecasting target.

  4. Close Broader context
    Advancing Urban Building Energy Modeling: Building Energy Simulations for Three Commercial Building Stocks through Archetype Development
    Md. Uzzal Hossain, Isabella Cicco, M. Bilec · 2024 · Buildings · cited 19 times · Not summarized yet

    Advancing Urban Building Energy Modeling develops a bottom-up physics-based model for commercial building stocks in Pittsburgh.

    Abstract

    Urban building energy models (UBEMs), developed to understand the energy performance of building stocks of a region, can aid in key decisions related to energy policy and climate change solutions. However, creating a city-scale UBEM is challenging due to the requirements of diverse geometric and non-geometric datasets. Thus, we aimed to further elucidate the process of creating a UBEM with disparate and scarce data based on a bottom-up, physics-based approach. We focused on three typically overlooked but functionally important commercial building stocks, which are sales and shopping, healthcare facilities, and food sales and services, in the region of Pittsburgh, Pennsylvania. We harvested r…

  5. Close Broader context
    Multi-objective optimal energy-efficient retrofit determination using hybrid urban building energy model: Considering uncertainties between models
    Linxi Luo, Hai-Lu Wei, Zi-Qi Lin et al. · 2024 · Building Simulation · cited 21 times · Not summarized yet

    Multi-objective optimal energy-efficient retrofit determination uses a hybrid urban building energy model to select retrofit solutions under uncertainty.

    Abstract

    Typical energy-efficient retrofit studies based on urban building energy models face challenges in quickly obtaining appropriate retrofit solutions and often ignore the unexpected outcomes caused by inherent model uncertainty. To solve it, this study proposes a decision support framework that integrates a hybrid urban building energy model (UBEM) method, NSGA-II, and TOPSIS to obtain rapidly the optimal energy-efficient retrofit solutions that take into account model uncertainty. The study took the building groups in Sipailou campus as a case study and identified 76 “stable solutions” and 149 “active solutions” that minimize energy consumption, carbon emission, and life-cycle cost (LCC) over…

How are these papers found?

We compare the title and abstract of this paper with those of every paper summarized on this site, and with the papers Semantic Scholar recommends, those it cites and those citing it (for a much-cited paper, its most recent citations and, from OpenAlex, the most cited ones). Among the prior work and the follow-ups, the papers that use each other in depth, a method it uses and the much-cited follow-ups come a little higher. The levels (very close, close, related) come from the similarity of the texts, not from a judgment of quality; * marks a paper without an abstract, compared by its title. The sentence under a paper is written by an AI from the two abstracts: check it in the papers. A paper marked not relevant by three readers leaves the list.

Updated on 6 November 2026.

The illustrated guide to the papers around a paper

The previous summary was created more than a year ago and can be re-run (if necessary) by clicking on the Run button below.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.