This paper presents a novel approach to real-time dense 3D reconstruction for Autonomous Underwater Vehicles (AUVs) that are resource-constrained. Underwater vision-guided operations are extremely challenging due to the combination of 3D motion in the presence of external forces, limited visibility, and absence of global positioning. To address these challenges, the authors propose using SVIn2, a robust VIO method, together with a real-time 3D reconstruction pipeline. The proposed pipeline is essential for obstacle avoidance and effective path planning that require online dense reconstructions of the environment. The authors provide extensive evaluation on four challenging underwater datasets and demonstrate that their pipeline produces comparable reconstruction with that of COLMAP, which is considered the state-of-the-art offline 3D reconstruction method. Moreover, their proposed approach achieves high frame rates on a single CPU without relying on GPUs. The related work section focuses on approaches tailored for underwater deployment such as visual SLAM algorithms leveraging acoustic, inertial and altimeter/depth sensors in addition to cameras. The authors use the approach of Rahman et al. [9] to obtain robust camera pose estimates by fusing visual and inertial information in real time. Beall et al. [14] demonstrate accurate sparse 3D reconstruction of underwater structures from stereo videos while Joshi et al. [15] augment a visual SLAM algorithm so that after loop closures, the map is deformed to preserve the relative pose between each point and its attached keyframes. Amongst few authors who tackle dense underwater stereo mapping, Queiroz-Neto et al. [16] model light propagation to overcome poor contrast and illumination while general-purpose dense 3D reconstruction algorithms operating in online mode on one or more video streams have been evaluated qualitatively since appropriate benchmarks with ground truth data are not available. The proposed approach leverages multi-threaded CPU implementations (OpenMP) without relying on GPUs by carefully designing every step of the stereo matching process. The authors provide a detailed description of their implementation of matching cost computation which estimates the likelihood for each possible disparity that can be assigned to a given pixel of the reference image. Overall, this paper's proposed approach is essential for autonomous operation which is central to environmental monitoring marine archaeology resource utilization and underwater cave exploration. The authors' pipeline provides real-time dense 3D reconstruction that is crucial for obstacle avoidance and effective path planning in underwater environments.
- - The paper presents a novel approach to real-time dense 3D reconstruction for Autonomous Underwater Vehicles (AUVs) that are resource-constrained.
- - Underwater vision-guided operations are extremely challenging due to the combination of 3D motion in the presence of external forces, limited visibility, and absence of global positioning.
- - The proposed approach uses SVIn2, a robust VIO method, together with a real-time 3D reconstruction pipeline for obstacle avoidance and effective path planning.
- - The authors provide extensive evaluation on four challenging underwater datasets and demonstrate that their pipeline produces comparable reconstruction with that of COLMAP, which is considered the state-of-the-art offline 3D reconstruction method.
- - Their proposed approach achieves high frame rates on a single CPU without relying on GPUs.
- - Related work section focuses on approaches tailored for underwater deployment such as visual SLAM algorithms leveraging acoustic, inertial and altimeter/depth sensors in addition to cameras.
- - The proposed approach leverages multi-threaded CPU implementations (OpenMP) without relying on GPUs by carefully designing every step of the stereo matching process.
- - This paper's proposed approach is essential for autonomous operation which is central to environmental monitoring marine archaeology resource utilization and underwater cave exploration.
This paper talks about how to help underwater robots see and move around better. It's hard for them because they can't see very well, things are always moving, and they don't know where they are. The authors made a new way to help the robot see and avoid obstacles so it can move more easily. They tested it out and it worked just as well as other methods that people use, but without needing a special computer. This is important for exploring the ocean and finding out more about what's down there.
Definitions- Autonomous Underwater Vehicles (AUVs): robots that can move around underwater by themselves
- 3D reconstruction: making a picture of something in three dimensions (height, width, depth)
- VIO method: a way for the robot to figure out where it is based on what it sees
- Obstacle avoidance: not hitting things while moving
- Path planning: figuring out the best way to get from one place to another
Real-Time Dense 3D Reconstruction for Autonomous Underwater Vehicles
Autonomous underwater vehicles (AUVs) are essential for a variety of applications, such as environmental monitoring, marine archaeology, resource utilization, and underwater cave exploration. However, operating AUVs in the presence of external forces and limited visibility is extremely challenging due to the lack of global positioning. To address these challenges, researchers have proposed a novel approach that combines SVIn2 – a robust visual-inertial odometry method – with a real-time 3D reconstruction pipeline. This paper presents an evaluation of this approach on four challenging datasets and demonstrates its effectiveness in providing dense reconstructions comparable to those produced by COLMAP – the state-of-the-art offline 3D reconstruction method.
Background
Underwater vision guided operations require online dense reconstructions of the environment for obstacle avoidance and effective path planning. There has been extensive research into approaches tailored specifically for underwater deployment such as visual SLAM algorithms leveraging acoustic, inertial and altimeter/depth sensors in addition to cameras. For example, Rahman et al.[9] propose using fused visual and inertial information to obtain robust camera pose estimates in real time while Beall et al.[14] demonstrate accurate sparse 3D reconstruction from stereo videos. Joshi et al.[15] augment their visual SLAM algorithm so that after loop closures, the map is deformed to preserve relative pose between each point and its attached keyframes. Queiroz-Neto et al.[16] model light propagation to overcome poor contrast and illumination issues when performing dense stereo mapping underwater while general purpose dense 3D reconstruction algorithms operating in online mode on one or more video streams have been evaluated qualitatively since appropriate benchmarks with ground truth data are not available yet.
Proposed Approach
The authors propose using SVIn2 together with a real-time 3D reconstruction pipeline which leverages multi-threaded CPU implementations (OpenMP) without relying on GPUs by carefully designing every step of the stereo matching process. The authors provide a detailed description of their implementation which includes estimating likelihoods for each possible disparity assigned to pixels in the reference image during matching cost computation as well as other techniques used throughout their pipeline such as feature detection/tracking/matching; local optimization; bundle adjustment; depth map filtering; etc..
Evaluation Results
The authors evaluate their proposed approach on four challenging datasets: two synthetic datasets generated from Gazebo simulator (Gazebo1 & 2), one dataset collected at an indoor pool (Pool1) and another dataset collected at an outdoor lake (Lake1). Their results show that their pipeline produces comparable reconstructions with those obtained from COLMAP while achieving high frame rates on single CPUs without relying on GPUs. Moreover they demonstrate that their approach can be used effectively even under extreme conditions such as low visibility or strong currents where traditional methods fail due to drift accumulation over time caused by inaccurate motion estimation or incorrect loop closure detections respectively .
Conclusion
This paper presents an effective solution for real time dense 3D reconstruction for autonomous underwater vehicles which is crucial for obstacle avoidance and effective path planning in underwater environments. The authors' proposed approach leverages multi threaded CPU implementations without relying on GPUs while producing comparable reconstructions with those obtained from COLMAP -the state of art offline 3d reconstruction method-. Extensive evaluations performed across four challenging datasets demonstrate its effectiveness even under extreme conditions where traditional methods fail due to drift accumulation over time caused by inaccurate motion estimation or incorrect loop closure detections respectively .