Results of the summarizing process for the arXiv paper: 2312.07720v2

In the field of directional dark matter experiments, SF6 has emerged as an ideal target gas due to its unique properties. A critical challenge in using SF6 and other proposed gases is effectively removing contaminant gases such as radon, water, oxygen, and nitrogen. These contaminants can lead to unwanted background events and loss of detector gas gain over time. To address this issue, a novel molecular sieve (MS) based gas recycling system has been developed for the simultaneous removal of both radon and common pollutants from SF6. This innovative apparatus not only minimizes the amount of gas required in experiments but also utilizes a Vacuum Swing Adsorption (VSA) technique for continuous, long-term operation. The capabilities of this gas system were tested with a 100 L low-pressure SF6 Time Projection Chamber (TPC) detector. For the first time, a newly developed low-radioactive MS type 5A was introduced which significantly reduced radon emanation compared to commercial counterparts. The incorporation of MS types 3A and 4A proved successful in absorbing common pollutants and mitigating against gain deterioration while recycling the target gas. The reduction in radon activity within the TPC detector was substantial with an upper limit of less than 7.2 mBq at a 95% confidence level (C.L.). Additionally, a ThGEM-based TPC detector setup was utilized for performance testing to demonstrate the effectiveness of the gas system in maintaining stable detector operation over extended periods. Overall, this study presents a comprehensive solution for purifying SF6 gas used in dark matter experiments by effectively removing contaminants and minimizing background events. The development of low-radioactive MS materials offers promising advancements in enhancing detector performance and ensuring reliable data collection for future research endeavors in this field.

• - SF6 is an ideal target gas for directional dark matter experiments due to its unique properties.
• - Contaminant gases such as radon, water, oxygen, and nitrogen need to be effectively removed when using SF6 to prevent unwanted background events and loss of detector gas gain.
• - A novel molecular sieve (MS) based gas recycling system has been developed for the simultaneous removal of radon and common pollutants from SF6.
• - The system utilizes Vacuum Swing Adsorption (VSA) technique for continuous, long-term operation and minimizes the amount of gas required in experiments.
• - Low-radioactive MS materials like type 5A have been introduced to reduce radon emanation significantly compared to commercial counterparts.
• - MS types 3A and 4A successfully absorb common pollutants and help mitigate against gain deterioration while recycling the target gas.
• - Radon activity within the TPC detector was reduced substantially with an upper limit of less than 7.2 mBq at a 95% confidence level (C.L.).
• - A ThGEM-based TPC detector setup was used to demonstrate the effectiveness of the gas system in maintaining stable detector operation over extended periods.
• - The study provides a comprehensive solution for purifying SF6 gas in dark matter experiments by removing contaminants and minimizing background events, enhancing detector performance, and ensuring reliable data collection for future research endeavors.

Summary- SF6 is a special gas used in experiments to find dark matter. - Other gases like radon, water, oxygen, and nitrogen must be removed to keep the experiment accurate. - A new system has been made to clean SF6 by removing radon and other pollutants using a method called Vacuum Swing Adsorption (VSA). - Special materials are used to reduce radon and pollutants in the gas. - The system helps keep the detector working well for a long time. Definitions- Dark matter: A type of mysterious substance that scientists study to understand more about the universe. - Contaminant: Something unwanted or harmful that needs to be removed. - Radon: A radioactive gas that can be dangerous if not controlled. - Detector: A device that helps scientists measure or detect something specific. - Purifying: Making something clean or pure by removing impurities.

Introduction: In recent years, the search for dark matter has become a major focus in the field of physics. Dark matter is believed to make up approximately 85% of the total mass in the universe, yet its exact nature remains a mystery. Various experiments have been conducted to detect and study dark matter particles, with directional dark matter experiments being one of the most promising approaches. One key component in these experiments is the use of target gases, which interact with potential dark matter particles passing through them. Among these gases, sulfur hexafluoride (SF6) has emerged as an ideal candidate due to its unique properties such as high density and low atomic number. However, using SF6 and other proposed gases comes with a critical challenge – effectively removing contaminants that can lead to unwanted background events and loss of detector gas gain over time. To address this issue, a team of researchers has developed a novel molecular sieve (MS) based gas recycling system for simultaneous removal of both radon and common pollutants from SF6. This innovative apparatus not only minimizes the amount of gas required in experiments but also utilizes Vacuum Swing Adsorption (VSA) technique for continuous long-term operation. The Study: The capabilities of this gas system were tested using a 100 L low-pressure SF6 Time Projection Chamber (TPC) detector. For the first time, a newly developed low-radioactive MS type 5A was introduced which significantly reduced radon emanation compared to commercial counterparts. The incorporation of MS types 3A and 4A proved successful in absorbing common pollutants and mitigating against gain deterioration while recycling the target gas. Results: The results showed substantial reduction in radon activity within the TPC detector with an upper limit of less than 7.2 mBq at a 95% confidence level (C.L.). This is significant considering that radon contamination is one of the major sources contributing to background events in dark matter experiments. The use of low-radioactive MS materials also offers promising advancements in enhancing detector performance and ensuring reliable data collection for future research endeavors. To further demonstrate the effectiveness of the gas system, a ThGEM-based TPC detector setup was utilized for performance testing over extended periods. The results showed stable detector operation with minimal background events, highlighting the efficiency of the gas recycling system in maintaining optimal conditions for dark matter detection. Conclusion: In conclusion, this study presents a comprehensive solution for purifying SF6 gas used in directional dark matter experiments. By effectively removing contaminants and minimizing background events, this novel molecular sieve based gas recycling system offers significant advantages over traditional methods. The development of low-radioactive MS materials also holds great potential in improving detector performance and ensuring reliable data collection for future research endeavors in this field. Overall, this research paper highlights the importance of addressing challenges associated with using target gases in directional dark matter experiments. With continued advancements and improvements in gas purification techniques, we can hope to gain a better understanding of dark matter particles and their role in shaping our universe.