Results of the summarizing process for the arXiv paper: hep-ex/0007002v1

In this study, the researchers integrated a system of 16 RISC CPUs to reconstruct and analyze a massive data set of high energy physics interactions. The data set consisted of 400 million interactions and had a size of 1.3 Terabytes. By utilizing these new CPUs, the researchers were able to process this large data set in an efficient and cost-effective manner. The data was generated using a hadron beam and a fixed target at Fermilab Experiment 769. Signals from particles created in or decaying near the target were recorded on Exabyte 8mm video tape drives with an impressive I/O capacity of 7 Terabytes per year and a storage capacity of 2.3 Gigabytes per tape. This significantly reduced the number of tape mounts required per day compared to using 9-track tapes. The CPUs were connected through an ETHERNET network with an I/O capacity of 15 Terabytes per year for minimal costs. Commercially supported workstations with little memory and no graphics were chosen as RISC CPUs due to their affordability yet powerful performance; these MIPS R3000 RISC CPUs operated at a frequency of 25 MHz and processed data approximately 20 times faster than the Motorola 68020 CPUs that were also employed in the study. Reconstructing the entire data set required around 8000 hours of processing time but yielded thousands of fully reconstructed particles containing charm quarks as samples for further analysis. Overall, this study demonstrates how integrating multiple RISC CPUs can effectively handle large-scale data sets in high energy physics research while minimizing costs. The use of affordable yet powerful processors allowed for efficient reconstruction and analysis, leading to valuable insights into charm quarks and their behavior in particle interactions.

• - Researchers integrated a system of 16 RISC CPUs to analyze a massive data set of high energy physics interactions.
• - The data set consisted of 400 million interactions and had a size of 1.3 Terabytes.
• - By utilizing these new CPUs, the researchers were able to process the large data set efficiently and cost-effectively.
• - Data was generated using a hadron beam and a fixed target at Fermilab Experiment 769.
• - Signals from particles created or decaying near the target were recorded on Exabyte 8mm video tape drives with an I/O capacity of 7 Terabytes per year and a storage capacity of 2.3 Gigabytes per tape.
• - The CPUs were connected through an ETHERNET network with an I/O capacity of 15 Terabytes per year for minimal costs.
• - Commercially supported workstations with little memory and no graphics were chosen as RISC CPUs due to their affordability yet powerful performance (MIPS R3000 RISC CPUs operated at a frequency of 25 MHz).
• - Reconstructing the entire data set required around 8000 hours of processing time but yielded thousands of fully reconstructed particles containing charm quarks as samples for further analysis.
• - This study demonstrates how integrating multiple RISC CPUs can effectively handle large-scale data sets in high energy physics research while minimizing costs.

Researchers used a group of special computers to study a lot of information about how particles interact with each other. The information they studied was very big, like 400 million interactions and 1.3 Terabytes in size. The special computers helped the researchers process this big information quickly and without spending too much money. They got the information by using a beam and target at Fermilab Experiment 769, and recorded it on video tape drives that could hold a lot of data. The special computers were connected together through a network to make them work together efficiently. These computers were chosen because they were affordable but still powerful, and it took a long time to process all the information but they found some interesting things for further study." Definitions- Researchers: People who do scientific studies. - CPUs: Special computers that can process lots of information. - Data set: A collection of information. - Interactions: How things affect or influence each other. - Efficiently: Doing something well and quickly. - Cost-effectively: Doing something well without spending too much money. - Hadron beam: A type of energy used in physics experiments. - Fixed target: Something that is hit by the hadron beam in an experiment. - I/O capacity: How much data can be inputted or outputted by a computer system. - Storage capacity: How much data can be stored on something like a tape drive. - ETHERNET network: A way for computers to connect and communicate with each other. -

Integrating Multiple RISC CPUs to Reconstruct and Analyze High Energy Physics Data

High energy physics research requires the analysis of massive data sets in order to gain valuable insights into particle interactions. In a recent study, researchers integrated a system of 16 RISC CPUs to reconstruct and analyze a large data set of high energy physics interactions. This article will discuss the details of this study, including the data set used, the processors employed, and how integrating multiple RISC CPUs allowed for efficient reconstruction and analysis.

Data Set Used

The data set used in this study consisted of 400 million interactions with a size of 1.3 Terabytes. It was generated using a hadron beam and fixed target at Fermilab Experiment 769. Signals from particles created in or decaying near the target were recorded on Exabyte 8mm video tape drives with an impressive I/O capacity of 7 Terabytes per year and storage capacity of 2.3 Gigabytes per tape; this significantly reduced the number of tape mounts required per day compared to using 9-track tapes.

Processors Employed

Commercially supported workstations with little memory but powerful performance were chosen as RISC CPUs due to their affordability yet strong performance; these MIPS R3000 RISC CPUs operated at 25 MHz frequency and processed data approximately 20 times faster than Motorola 68020 CPUs that were also employed in the study. The CPUs were connected through an ETHERNET network with an I/O capacity 15 Terabytes per year for minimal costs.

Reconstruction & Analysis

Reconstructing the entire data set required around 8000 hours of processing time but yielded thousands fully reconstructed particles containing charm quarks as samples for further analysis. By utilizing these new CPUs, researchers were able to process this large data set efficiently while minimizing costs; integrating multiple RISC CPUs effectively handled large-scale data sets in high energy physics research while minimizing costs due to their affordability yet powerful performance capabilities.

Overall, this study demonstrates how integrating multiple RISC CPU can effectively handle large-scale datasets in high energy physics research while minimizing costs by utilizing affordable yet powerful processors that allow for efficient reconstruction and analysis leading to valuable insights into charm quarks behavior in particle interactions.

<