Structural Performance of Laterite soil Stabilised with Cement and Blue Gum (Eucalyptus Globulus) Wood Ash for Use as a Road base Material

Auteurs : Balise Dabou, Christopher Kanali, zachary Abiero-Gariy

International Journal of Engineering Trends and Technology, 69(9),257-264, September 2021
arXiv: 2109.08507v1 - DOI (physics.soc-ph)
8 pages, 10 Figures, Published with International Journal of Engineering Trends and Technology (IJETT)
Licence : CC BY-NC-ND 4.0

Résumé : This study examines the effect of partially replacing cement with blue gumwood ash (BGWA) in stabilizing laterite soil to be used as a potential road base material. Initially, Ordinary Portland Cement was introduced to the soil at varying contents from 0 to 12% in steps of 3% by weight of the soil sample. Each wet sample of the soil was subjected to the Californian bearing ratio (CBR) and unconfined compressive strength (UCS) tests in determining the optimal soil-cement mix. Results show that CBR and UCS values increased as cement content increased, and a 6% cement content corresponding to a UCS value of 2.88 MPa at 7 days of curing met the specifications of the Overseas Road Note 31 to be used in the construction of road bases. The second treatment involved partially replacing the 6% cement content with BGWA in decreasing steps of 1%. Peak CBR value of 348% at 2% BGWA content (>160% recommended by Kenya road design manual) and UCS value of 2.99 MPa at 7 days of curing were obtained. Thus, BGWA can partially replace cement in stabilizing laterite soil for use in the construction of road bases as per the Overseas Road Note 31 specifications.

Soumis à arXiv le 17 Sep. 2021

Explorez l'arbre d'article

Cliquez sur les nœuds de l'arborescence pour être redirigé vers un article donné et accéder à leurs résumés et assistant virtuel

Accédez également à nos Résumés, ou posez des questions sur cet article à notre Assistant IA.

Recherchez des articles similaires (en version bêta)

En cliquant sur le bouton ci-dessus, notre algorithme analysera tous les articles de notre base de données pour trouver le plus proche en fonction du contenu des articles complets et pas seulement des métadonnées. Veuillez noter que cela ne fonctionne que pour les articles pour lesquels nous avons généré des résumés et que vous pouvez le réexécuter de temps en temps pour obtenir un résultat plus précis pendant que notre base de données s'agrandit.