Results of the summarizing process for the arXiv paper: 2110.08204v1

In this study, the authors propose a novel approach to fabricate fiber-reinforced polymer ceramic composites using wet electrospinning. The method involves using a reactive ceramic precursor gel as a collector, which is later activated using metakaolin to yield a ceramic-0.5 wt% polyethylene oxide (PEO) fiber composite. The fabricated polymer ceramic composites demonstrate an increase of 29% and 22% in indentation modulus and indentation hardness, respectively. The authors illustrate their approach by generating PEO fibers in a potassium silicate gel, showing the viability of the process and suggesting potential for scalable manufacturing of these materials. The experimental setup for wet electrospinning is shown in Figure 1, where a syringe pump is used to feed the PEO solution into an electric field generated between the needle tip and the collector plate filled with the reactive ceramic precursor gel. The resulting fibers are collected on the surface of the gel, which acts as both a support structure and a source of reactants for subsequent activation. The authors also investigate the effect of varying PEO concentration on composite properties and find that increasing PEO concentration leads to higher fiber density and improved mechanical properties. They further analyze the microstructure of the composite using scanning electron microscopy (SEM) and X-ray diffraction (XRD), confirming successful conversion of precursor gel to ceramic phase. Overall, this study presents a promising approach for fabricating fiber-reinforced polymer ceramic composites using wet electrospinning with reactive ceramic precursor gels as collectors. The findings suggest potential applications in various fields such as aerospace, automotive, and biomedical engineering where high-performance materials are required.

• - The authors propose a novel approach to fabricate fiber-reinforced polymer ceramic composites using wet electrospinning.
• - A reactive ceramic precursor gel is used as a collector, which is later activated using metakaolin to yield a ceramic-0.5 wt% polyethylene oxide (PEO) fiber composite.
• - The fabricated polymer ceramic composites demonstrate an increase of 29% and 22% in indentation modulus and indentation hardness, respectively.
• - PEO fibers are generated in a potassium silicate gel, showing the viability of the process and suggesting potential for scalable manufacturing of these materials.
• - The experimental setup for wet electrospinning is shown in Figure 1, where a syringe pump is used to feed the PEO solution into an electric field generated between the needle tip and the collector plate filled with the reactive ceramic precursor gel.
• - Increasing PEO concentration leads to higher fiber density and improved mechanical properties.
• - Microstructure analysis confirms successful conversion of precursor gel to ceramic phase.
• - This study presents a promising approach for fabricating fiber-reinforced polymer ceramic composites using wet electrospinning with reactive ceramic precursor gels as collectors.
• - Potential applications include aerospace, automotive, and biomedical engineering where high-performance materials are required.

Scientists made a new way to make strong materials using wet electrospinning. They used a special gel that turns into ceramic when activated with metakaolin and mixed it with polyethylene oxide (PEO) fibers. The new material they made is 29% harder and 22% stronger than before. They used a machine called a syringe pump to make the fibers, and the more PEO they used, the better the material became. This new method could be useful for making things like planes, cars, and medical devices that need strong materials." Definitions- Fiber-reinforced polymer ceramic composites: Materials made by combining fibers with a polymer matrix and ceramic particles to create a strong composite material. - Wet electrospinning: A process where liquid solutions are turned into solid fibers using an electric field. - Reactive ceramic precursor gel: A special type of gel that can turn into ceramic when activated by certain chemicals or processes. - Metakaolin: A type of clay mineral that can be used as an activator for reactive ceramic precursor gels. - Polyethylene oxide (PEO): A type of polymer commonly used in fiber production. - Indentation modulus: A measure of how much force is needed to indent or deform a material. - Indentation hardness: A measure of how resistant a material is to indentation or deformation caused by external forces.

Fabricating Fiber-Reinforced Polymer Ceramic Composites Using Wet Electrospinning

In this research paper, the authors propose a novel approach to fabricate fiber-reinforced polymer ceramic composites using wet electrospinning. The method involves using a reactive ceramic precursor gel as a collector, which is later activated using metakaolin to yield a ceramic-0.5 wt% polyethylene oxide (PEO) fiber composite. The fabricated polymer ceramic composites demonstrate an increase of 29% and 22% in indentation modulus and indentation hardness, respectively. This study presents a promising approach for fabricating high-performance materials with potential applications in various fields such as aerospace, automotive, and biomedical engineering.

Experimental Setup

The experimental setup for wet electrospinning is shown in Figure 1 below: Figure 1: Schematic representation of the experimental setup for wet electrospinning [Source: Mishra et al., 2019] In this setup, a syringe pump is used to feed the PEO solution into an electric field generated between the needle tip and the collector plate filled with the reactive ceramic precursor gel. The resulting fibers are collected on the surface of the gel, which acts as both a support structure and source of reactants for subsequent activation.

Effect of Varying PEO Concentration

The authors also investigate the effect of varying PEO concentration on composite properties and find that increasing PEO concentration leads to higher fiber density and improved mechanical properties. They further analyze microstructure of composite using scanning electron microscopy (SEM) and Xray diffraction (XRD), confirming successful conversion from precursor gel to ceramic phase.

Conclusion

Overall, this study presents a promising approach for fabricating fiber reinforced polymer ceramic composites using wet electrospinning with reactive ceramic precursor gels as collectors. The findings suggest potential applications in various fields such as aerospace, automotive, and biomedical engineering where high performance materials are required