Directed Aggregation of Cellulose Nanocrystals to Enhance Chiral Twist

Ranked by how close their title and abstract are to this paper’s. Select some to read them together.

Closest papers

1. Very close Same question Cited by this paper Not relevant

   Centrifuge fractionation during purification of cellulose nanocrystals after acid hydrolysis and consequences on their chiral self-assembly.

   A. Svagan, F. Vilaplana, T. Pettersson et al. · 2023 · Carbohydrate Polymers · cited 15 times · Not summarized yet

   Centrifuge fractionation studies how purification alters CNC dispersity and chiral self-assembly, as this paper examines centrifugation-driven bundles and liquid-crystalline behavior.

   Abstract

   The inherent colloidal dispersity (due to length, aspect ratio, surface charge heterogeneity) of CNCs, when produced using the typical traditional sulfuric acid hydrolysis route, presents a great challenge when interpreting colloidal properties and linking the CNC film nanostructure to the helicoidal self-assembly mechanism during drying. Indeed, further improvement of this CNC preparation route is required to yield films with better control over the CNC pitch and optical properties. Here we present a modified CNC-preparation protocol, by fractionating and harvesting CNCs with different average surface charges, rod lengths, aspect ratios, already during the centrifugation steps after hydroly…

2. Very close Review Cites this paper Not relevant

   Exploring chiral photonic cellulose nanocrystal composites: From self-assembly to advanced applications.

   Mansi Goyal, Changrong Shi, M. Hassanpour et al. · 2025 · Advances in Colloid and Interface Science · cited 6 times · Not summarized yet

   Exploring chiral photonic CNC composites reviews self-assembly mechanisms, preparation, and interventions that control CNC optical properties.

   Abstract

   Cellulose nanocrystals (CNCs) derived from the acid hydrolysis of cellulose, are renewable, biocompatible, and biodegradable. CNCs with well-defined hierarchical structures offer remarkable iridescence which is easily tunable and exhibit non-toxicity. In this review, the mechanism behind the formation of structural color has been elucidated to address the fundamental principles governing optical properties. A detailed overview of CNC suspension preparation, film fabrication techniques, and external interventions is provided to control the self-assembly of CNCs. We further aim to shed light on the interaction of CNCs with selective additives to improve the material performance and functionali…

3. Very close Broader context Cites this paper Not relevant

   Tuning the morphology of aerosolised cellulose nanocrystals via controlled aggregation

   Daniel Warnes, Jia-Hui Lim, Richard M. Parker et al. · 2025 · Not summarized yet

   Tuning aerosolised CNC morphology investigates aggregation during aerosolisation rather than bundle formation and chiral liquid-crystalline behavior in suspensions.

   Abstract

   Cellulose nanocrystals (CNCs) are polycrystalline, rod-shaped nanoparticles isolated from cellulose, which have attracted increasing attention for a wide variety of applications. While there has been significant research into CNCs in suspensions, hydrogels and films, there have been remarkably few studies that investigated their properties during and after aerosolisation. Here, we studied how aerosolisation impacts the size and morphology of different CNCs suspensions with different surface functionalities. By building a new experimental setup, we observed that colloidally-metastable aqueous CNC suspensions, achieved by carboxylation of the surface hydroxy groups or by exposure to high inten…

4. Very close Broader context Not relevant

   Structuring Cellulose

   Diogo Vieira Pedro Marques Saraiva · Not summarized yet

   Structuring Cellulose examines ways to steer CNC self-assembly for structural color and coatings, including electrostatic screening and particle processing.

   Abstract

   Cellulose nanocrystals (CNCs) are plant-derived rod-like particles that self-assemble into cholesteric liquid crystals, producing structural color upon solvent removal. Unlike pigments, which absorb light and fade, structural color arises from interference with submicron features, offering a durable and sustainable alternative for paints and coatings. Yet achieving uniform color, suppressing iridescence, accessing ordered defect structures such as focal conic domains, and compatibilizing CNCs with industrially relevant solvents all remain challenging. This thesis addresses these challenges across three experimental chapters, steering CNC self-assembly through electrostatic screening, particl…

5. Very close Broader context Cited by this paper Not relevant

   Preparation of Cellulose Nanocrystals: Controlling the Crystalline Type by One-Pot Acid Hydrolysis.

   V. Calvo, Miguel Á. Álvarez Sánchez, Lucas Güemes et al. · 2023 · ACS Macro Letters · cited 19 times · Not summarized yet

   Preparation of Cellulose Nanocrystals studies acid-hydrolysis parameters and crystalline type, rather than post-hydrolysis aggregation and chiral assembly.

   Abstract

   Cellulose nanocrystals (CNCs) have aroused increasing interest owing to their renewable origin and excellent properties derived from their size and morphology. Based on their chain orientation, CNCs can be prepared as two main allomorphs (I or II). However, achieving pure CNC allomorphs still requires enhanced control on the CNCs synthesis process and improved understanding of the involved reaction parameters. In this work, we study in detail a set of parameters for CNC synthesis using one-pot acid hydrolysis and evaluate their influence on the outcome with respect to yield, purity, and repeatability. We also demonstrate that a fast, nondestructive, and accurate methodology based on dynamic …

6. Very close Same question Not relevant

   Tracking the structural evolution of cellulose nanocrystal suspensions via small angle light scattering

   Oswaldo Erazo, N. Plaza, C. Houtman et al. · 2026 · Cellulose · Not summarized yet

   Tracking structural evolution measures CNC aggregation and cholesteric ordering in aqueous suspensions, focusing on concentration, time, and ultrasonication.

   Abstract

   Understanding and controlling agglomeration of cellulose nanocrystals (CNCs) is critical to enable their effective use in various applications. Light scattering techniques are powerful tools for studying how CNCs self-assemble in aqueous suspensions. We used small angle light scattering (SALS) and polarized microscopy to study the formation of ordered domains in CNC suspensions of moderate concentration (1–9 wt%) as a function of time and ultrasonication. Concentration, time and ultrasonication all influenced the structure and rate of tactoid formation. Ultrasonication allowed long-range order to develop faster, and at lower concentrations. The cholesteric pitch increased, and more lamellar …

7. Very close Broader context Cites this paper Not relevant

   Tuning the morphology of aerosolised cellulose nanocrystal particulates via controlled aggregation.

   Daniel Warnes, Wen-Yang Xu, Jia-Hui Lim et al. · 2025 · Carbohydrate Polymers · cited 1 time · Not summarized yet

   Tuning aerosolised CNC particulates studies how surface functionality affects aggregation during aerosolisation, not purification-driven bundles in liquid-crystalline suspensions.

   Abstract

   Cellulose nanocrystals (CNCs) are polycrystalline, rod-shaped nanoparticles isolated from cellulose that have attracted increasing attention for a wide variety of applications. While there has been significant research into CNCs in suspensions, hydrogels and films, there have been remarkably few studies that investigated their properties during and after aerosolisation. Here, we studied how the surface functionality of different CNC suspensions impacts the size and morphology of the CNC particulates formed when the initial suspensions are aerosolised. By building a new experimental setup, we observed that colloidally-metastable aqueous CNC suspensions - achieved by carboxylation of the surfa…

8. Very close Same question Cited by this paper Not relevant

   Cellulose Nanocrystal Aqueous Colloidal Suspensions: Evidence of Density Inversion at the Isotropic‐Liquid Crystal Phase Transition

   R. D. da Rosa, Pedro E. S. Silva, Diogo V. Saraiva et al. · 2022 · Advances in Materials · cited 23 times · Not summarized yet

   The density-inversion study examines tactoid formation and liquid-crystal phase behavior in aqueous CNC suspensions, as this paper links aggregation to chiral ordering.

   Abstract

   The colloidal suspensions of aqueous cellulose nanocrystals (CNCs) are known to form liquid crystalline (LC) systems above certain critical concentrations. From an isotropic phase, tactoid formation, growth, and sedimentation have been determined as the genesis of a high‐density cholesteric phase, which, after drying, originates solid iridescent films. Herein, the coexistence of a liquid crystal upper phase and an isotropic bottom phase in CNC aqueous suspensions at the isotropic–nematic phase separation is reported. Furthermore, isotropic spindle‐like domains are observed in the low‐density LC phase and high‐density LC phases are also prepared. The CNCs isolated from the low‐ and high‐densi…

Prior work it builds on

1. Very close Same question Not relevant

   Aggregation behavior of aqueous cellulose nanocrystals: the effect of inorganic salts

   Tuan Phan-Xuan, A. Thuresson, M. Skepö et al. · 2016 · Cellulose · cited 137 times · Not summarized yet

   Aggregation behavior studies salt-induced CNC colloidal stability and aggregate structure, contrasting with this paper's finding that ionic treatments cause uncontrolled aggregation.

   Abstract

   Natural anisotropic building-blocks such as cellulose nanocrystals (CNCs) have attracted considerable attention due to their biodegradability and nanometer-size. In this work the colloidal behavior of CNCs, obtained from sulfuric acid hydrolysis of microcrystalline cellulose, has been studied in presence of salts of different valences. The influence on the colloidal stability and nature of aggregates has been investigated for monovalent salts (LiCl, NaCl, KCl, CsCl), divalent salts (CaCl2 and MgCl2), and a trivalent salt (AlCl3), both experimentally by means of turbidity and small angle X-ray scattering (SAXS) measurements, as well as by Monte Carlo simulations using a simple coarse-grained …

2. Very close Broader context Not relevant

   Orienting cellulose nanocrystal functionalities tunes the wettability of water-cast films.

   Charles Bruel, Salomé Queffeulou, P. Carreau et al. · 2020 · Langmuir · cited 25 times · Not summarized yet

   Orienting CNC functionalities relates surface-face orientation to wettability of water-cast films, while this paper links hydrophobic-face attachment to bundle formation.

   Abstract

   Cellulose nanocrystal (CNC)-based materials display apparently erratic wetting behaviors with contact angle (CA) variations as large as 30 ° from sample to sample. This work hypothesizes that it is the orientation of CNC amphiphilic functionalities at the interface with air that causes the variability in CA. By exploiting relationships with Hansen solubility parameters theory, a set of surface tension parameters is proposed for both the polar and the non-polar surfaces of cellulose Iβ nanocrystals. These coefficients elucidate the wettability of CNC materials by establishing a correlation between the wetting properties of the air/sample interface and its chemical composition in terms of non-…

3. Close Broader context Not relevant

   Edge-On (Cellulose II) and Face-On (Cellulose I) Adsorption of Cellulose Nanocrystals at the Oil–Water Interface: A Combined Entropic and Enthalpic Process

   S. Haouache, Yu Chen, C. Jiménez-Saelices et al. · 2022 · Biomacromolecules · cited 14 times · Not summarized yet

   The interface study compares how CNC crystal types adsorb at oil–water surfaces, rather than how purification shapes CNC bundles and chiral assembly.

   Abstract

   Nanocelluloses can be used to stabilize oil–water surfaces, forming so-called Pickering emulsions. In this work, we compare the organization of native and mercerized cellulose nanocrystals (CNC-I and CNC-II) adsorbed on the surface of hexadecane droplets dispersed in water at different CNC concentrations. Both types of CNCs have an elongated particle morphology and form a layer strongly adsorbed at the interface. However, while the layer thickness formed with CNC-I is independent of the concentration at 7 nm, CNC-II forms a layer ranging from 9 to 14 nm thick with increasing concentration, as determined using small-angle neutron scattering with contrast-matched experiments. Molecular dynamic…

4. Close* Shared data, tool or method Not relevant

   Suspension viscosities and shape parameter of cellulose nanocrystals (CNC)

   Y. Boluk, R. Lahiji, Li-Yan Zhao et al. · 2011 · Colloids and Surfaces A: Physicochemical and Engineering Aspects · cited 227 times · Not summarized yet

   Suspension viscosities and shape parameter provides a viscosity-based characterization method, which this paper uses alongside microscopy and diffraction.

5. Close Shared data, tool or method Not relevant

   Benchmarking Cellulose Nanocrystals Part II: New Industrially Produced Materials.

   G. Delepierre, Oriana M. Vanderfleet, Elina Niinivaara et al. · 2021 · Langmuir · cited 91 times · Not summarized yet

   Benchmarking industrial CNCs characterizes material properties across CNC sources, relevant to comparing how CNC characteristics affect their behavior.

   Abstract

   The demand for industrially produced cellulose nanocrystals (CNCs) has been growing since 2012, when CelluForce Inc. opened its inaugural demonstration plant with a production capacity of 1 tonne per day. Currently, there are 10 industrial CNC producers worldwide, each producing a unique material. Thus, academic researchers and commercial users alike must consider the properties of all available CNCs and carefully select the material which will optimize the performance of their desired application. To support these efforts, this article presents a thorough characterization of four new industrially produced CNCs including sulfated CNCs from NORAM Engineering and Constructors Ltd. (in cooperat…

Papers that cite it

1. Close Review Not relevant

   Magnetic Cellulose Nanocrystal Composites: Synthesis, Properties, Applications, and Opportunities

   Mohammad Jahid Hasan, K. Chand, E. Ureña-Benavides et al. · 2026 · Nanomaterials · cited 1 time · Not summarized yet

   Magnetic Cellulose Nanocrystal Composites reviews synthesis, properties, and applications of magnetic CNC composites.

   Abstract

   Cellulose nanocrystals (CNCs) are abundant, renewable, biodegradable, non-toxic, and cost-effective nanomaterials with exceptional properties, making them highly appealing for nanocomposite material fabrication. Recognized for their sustainability, CNCs are emerging as promising substrates for the fabrication of functional, stimuli-responsive nanomaterials. This review highlights nanocomposites comprising magnetic nanoparticles with various forms of cellulose-based materials, with a primary focus on magnetic cellulose nanocrystal (MCNC) composites, yielding materials capable of controlled, on-demand responses to external magnetic fields. The magnetic properties of these nanocomposites can be…

2. Close Broader context Not relevant

   Self-healing and thermo bonding nanocellulose-vitrimer films

   Naghmeh Nasiri, D. J. Mendoza, J. F. Hooper et al. · 2026 · Advanced Composites and Hybrid Materials · Not summarized yet

   Self-healing vitrimer films combine CNCs with polymer networks, addressing composite-film fabrication rather than CNC aggregation or chiral liquid crystals.

   Abstract

   This study demonstrates the scalable fabrication of novel cellulose nanocrystal (CNC)-vitrimer composite films through a simple dip-coating process followed by in situ polymerization. FTIR analyses confirm rapid monomer uptake and complete vitrimer network formation within 8 h at 145 °C, evidenced by the disappearance of epoxide and carboxyl peaks and the emergence of ester linkages. XPS and diffusion-edited 1H NMR provide evidence consistent with covalent attachment of vitrimer species to the CNC surface, supporting the formation of a chemically integrated hybrid interface. Cross-sectional SEM imaging uncovers a stratified architecture comprising vitrimer-rich surface layers, an unmodified …

3. Close Same question Not relevant

   Orientational ordering benefits nanorod sonication

   Z. Tosheva, J. Lagerwall · 2026 · PHYSICAL REVIEW MATERIALS · Not summarized yet

   Orientational ordering benefits nanorod sonication studies how CNC concentration and liquid-crystal phase affect processing and suspension structure.

   Abstract

   While ultrasonication is a well established method to disperse nanorods, insufficient attention has been given to the impact of the particle mass fraction W s at which sonication takes place. Its importance goes far beyond viscosity tuning, since a dilute isotropic nanorod suspension transitions to a liquid crystal (LC) phase if W s surpasses a threshold, via a wide biphasic window of isotropic–LC equilibrium phase coexistence. By systematically varying W s of suspensions of cellulose nanocrystals (CNCs) across and beyond the biphasic range we show that W s strongly influences the sonication process. Near the original suspension's stability limit of the isotropic phase, W 0 * , the sonicatio…

4. Related* Broader context Not relevant

   Synergistic effects of salt and silica nanoparticles on the properties of cellulose nanocrystal photonic films

   Mansi Goyal, M. Hassanpour, Nethmi Kulanika Dayarathne et al. · 2025 · Chemical Engineering Journal · cited 2 times · Not summarized yet

   Synergistic effects of salt and silica nanoparticles examines additives in CNC photonic films, a neighboring way to modify CNC optical materials.

5. Related* Broader context Not relevant

   Electrostatic-based separation system for negatively charged cellulose nanocrystals

   Sutthida Sukaiem, Benyapha Kheawmanee, Supaporn Guntha et al. · 2025 · Chemical Engineering Journal Advances · cited 2 times · Not summarized yet

   Electrostatic-based separation develops a separation system for negatively charged CNCs, relating to the charge-dependent processing of CNC suspensions.